Robobloq Multi-touch Sensor

£12.99
Type: Sensor
SKU: 00081

Robobloq Multi-touch Sensor Overview

The multi-touch sensor has many touch sensors which will detect the status when the points are touched, the lights will be on when touching the points. At the same time, you can use the alligator clip or the wire to extract the touching points from the sensors, For example, extract the touching points to the fruits, this will expand the utility of the sensors.

The sensor will adjust the threshold value intellectually, it will reset the threshold value when turning off the electricity to make sure it will detect the touching action sensitively when connecting the points to the electrically conductive materials. For example, it will have an effect like the distance touching when the touching sensitive value is high.

Multi-touch Sensor Specifications

Working Voltage

5V

Working current

30ma

Maximum current

100MA

Working temperature

-25-55

communication method

IIC

Dimension

***

 

Ⅲ.Characteristics

Principles:

It uses the electric capacity to detect, there is the original electric capacity Cp between the touching points and the earth. When the body or other conductors get close to or touch the multi-touch points, The equivalent electric capacity which between touching points and earth will change correspondingly compared to the original electric capacity, and the MCU will detect the points which be touched. Because the touching judgement is based on the detection of electric capacity changes. So it will detect when the sensor not be touched.

a) The light sensor supports Arduino IDE programming and provides runtime libraries to simplify programming.

b) The sensor is available for Robobloq-APP and MyQode-PC GUI operating based on scratch, suitable for all ages.

c) It can be used for installation with M4 holes, compatible with Robobloq metal-related robots and Lego blocks.

d) Having an RJ11 interface makes it convenient to connect to any black port on the Q-mind series motherboards. (Both Q-mind and Q-mind plus included)

e) After the robot successfully connects to the PC, the sensor name will pop out automatically, and the sensor name can be seen in the console on the APP side.

f) It supplies digital and analogue export ports

Ⅳ. Multi-touch Sensor Method of use

a) Assembly

It has 4 mounting holes. When setting up, kindly pay attention to get metal parts away with components on the circuit board in case that component damage or short circuit happens.

b) Connection

The black RJ11 interface connected to Qmind and Qmind plus can help the sensor get power and communication to the motherboard.

After the connection is completed, the name of the connected module will pop up on the PC side, and the corresponding port can also be checked in the APP console.

After the connection is completed, the name of the connected module will pop up on the PC end.

Click to edit the product in Ali Orders.
Note: only show for shop owner