Sensor Joystick

£12.99
Type: Sensor
SKU: 00108

Sensor Joystick Overview

The joystick module contains a cross joystick, which can be used to control the Magic Rock robot and Scratch stage interactive games. This module will output the value representing the position on the x-axis and y-axis respectively for user-defined programming. This module transmits the value to the Qmind series main control board through the RJ11 cable and connects to the black interface on the mainboard.

Ⅱ. Specifications

Operating Voltage

5V DC

Signal mode

2-axis analogue output

Cross rocker

Consists of two potentiometers and balance rings

Module size

52 x 25 x 28 mm

 

Sensor Joystick characteristics

a) The balance ring divides the joystick displacement into horizontal movement (X) and vertical movement (Y), and there are silk-screen marks on the circuit board ;

b) It simulates the voltage of the potentiometer to determine the pushing position of the sensor joystick;

c) Anti-reversed-voltage- polarity: It could be protective for the sensor even when connecting the wire to the motherboard reversely or wrong.

d) Having an RJ11 interface makes it convenient to connect to any black port on the Q-mind series motherboards. (Both Q-mind and Q-mind plus included)

e) It can be used for installation with M4 holes, compatible with Robobloq metal-related robots and Lego blocks.

f) It provides outputs for digital and analogue signal.

g) The joystick sensor supports Arduino IDE programming, and provides runtime libraries to simplify programming;

h) The sensor is available for Robobloq-APP and MyQode-PC GUI operating based on scratch, suitable for all ages;

i) After the robot successfully connects to the PC, the sensor name will pop out automatically, and the sensor name can be seen in the console on the APP side.

Click to edit the product in Ali Orders.
Note: only show for shop owner